– Point to point insulation testing 100K – 100MΩ
– Dynamic pass/fail thresholds during measurement
– Compact, robust and portable design
– Manual control of fault conditions and tests
– Accurate high current, low energy earth bond testing
– Patient leakage testing
– Point-to-point insulation testing
– Automatic warning of secondary earth/ground paths
Manual
Datasheets
Datasheets
| Insulation Resistance | |
|---|---|
| Measurement | Point-to-point and EUT to Earth |
| Voltage | 500VDC @1mA |
| Maximum O/C Voltage | less than 600VDC |
| Range | 100K – 100MΩ ± 5% ± 2 Digits |
| Resolution | 0.01MΩ |
| Short Circuit Current | less than 2mA |
| Earth Continuity | |
|---|---|
| Pre-pulse | 2 wire ZAP technique |
| Pulse Shape | Exponential Decay |
| Decay Time | 200 – 550μs to 5% of peak (0.1 to 0.8Ω respectively) |
| Method | Wire |
| Measurement Current | greater than or equal 200mADC into 2Ω |
| Max Test Voltage | 4-24Vrms o/c |
| Measuring Range (Low Range) | 0.001 – 0.999Ω |
| Resolution | 0.1Ω |
| Measuring Range (Mid Range) | 1.00 – 9.99Ω |
| Measuring Range (High Range) | 10.0 – 19.9Ω |
| Accuracy | ± 1% of value, ± 5mΩ ± 1% of value, ± 5mΩ |
| Circuit Protection | Test inhibited if ≥ 30VAC or DC at 4mm inputs |
| Voltage Measurement | |
|---|---|
| Application | L-N, L-E, N-E and touch voltage (IEC 61010) |
| Range | 0.0V – 300VAC |
| Resolution | 0.1Hz |
| Accuracy | Unspecified |
| Mains frequency | 45.0 – 66.0Hz |
| Powered Leakage Measurements | |
|---|---|
| IEC 62353 | Equipment Leakage (Direct) |
| IEC / AAMI 60601 | Earth + Enclosure Leakage + Patient Leakage |
| NFPA-99 | Ground + Chassis Leakage + Patient Leakage |
| IEC 61010 | Touch Leakage, Touch Voltage |
| Test Voltage | Mains Supply Voltage |
| Measuring Range | 0.1 – 9999μA (0.1 – 8000μA typical for IEC61010) |
| Measurement/Display Resolution | 0.1μA |
| Accuracy | ± 2%, ± 5μA |
| Mains Reversal | Soft Key |
| Single Fault Conditions | Open Neutral and Open Earth Via Soft Key |
| Frequency Response | IEC 60601 – 62353, NFPA-99, and IEC 61010 selectable |
| Power Source | |
|---|---|
| Maximum Current Rating | 20A @ 120V / 16A @ 230V |
| Duty cycle (@21°C ambient) | 16A to 20A, 3 min. on/ 10 min. off 10A to 15A, 3 min. on/ 5 min. off 0A to 10A, continuous |
| Mains Power | 90-264V 48-64Hz |
| EUT Load Current Measurement | |
|---|---|
| Range | 0.0A – 20.0A |
| Resolution | 0.1A |
| Accuracy | ±5% ± 2 digits |
| General Specifications | |
|---|---|
| Weight | 1.1kg/2lbs (unit) 2.2kg/5lbs (complete with accessories) |
| Size (L x W x D) | 225 x 150 x 100mm / 9 x 6 x 4” |
| Operating Temperature | 0 to 40°C |
| Humidity | 0 – 98% Relative humidity, non-condensating |
| Storage Temperature | -10 to 50°C |
| Altitude | 0 – 2000m |
| Ingress Protection | IP 40 |
| Operating Pollution Degree | 2, according to IEC 60529 |
| Overvoltage Category | CAT II 300V |
Register your product today to activate your warranty and to stay up to date with the latest product updates, news and support information.
If you wish to calibrate your Safetest 60+, please locate the nearest service center or contact us directly using the link below.
Sign up to our mailing list today to stay up to date with the latest industry news and information from Seaward.
Contact us
Email: sales@rigelmedical.com
Switchboard: +44 (0) 191 586 3511
Phone: +44 (0) 191 587 8730
