– Rugged, cost effective medical safety analyzer
– Large color display and easy to use interface
– Full range of medical electrical safety tests to NFPA-99
– 10 lead leakage patient testing
– Tests and fault conditions can be selected with a single key press
– Accurate high current, low energy earth bond testing
Manual
Manuals
Datasheets
| Powered Leakage Measurements | |
|---|---|
| NFPA-99 | Ground leakage[br]Chassis leakage (Touch Current)[br]Patient lead leakage |
| Measuring Range | 0.1 – 9999μA |
| Measurement/Display Resolution | 0.1μA |
| Accuracy | ± 2%, ±5μA |
| Mains Reversal | Soft key |
| Single Fault Conditions Open Neutral | Via soft key |
| Open Ground | Via soft key |
| Ground Continuity | |
|---|---|
| Method | 2 wire ZAP technique |
| Test Current | >± 200mADC into 2Ω |
| Max Test Voltage | 4-24Vrms o/c |
| Measuring Range (low range) Resolution | 0.001 – 0.999Ω[br]0.001Ω |
| Measuring Range (mid range) Resolution | 1.00 – 9.99Ω[br]0.01Ω |
| Measuring Range (high range) Resolution | 10.0 – 19.9Ω[br]0.1Ω |
| Accuracy | ±1% of value, ± 5mΩ |
| Circuit Protection | Test inhibited if ≥ 30VAC or DC at 4mm inputs |
| EUT Load Current Measurement | |
|---|---|
| Range | 0.0A – 20.0A |
| Resolution | 0.1A |
| Accuracy | ±5% ± 2 digits |
| Voltage Measurement | |
|---|---|
| Application | H-N, H-G, N-G and touch voltage (IEC 61010) |
| Range | 0.0V – 300VAC |
| Resolution | 0.1Hz |
| Accuracy | ± 2% ± 5 digits (between 10V – 270VAC) |
| Mains Frequency | 45.0 – 66.0Hz |
| Environmental | |
|---|---|
| Operating temperature | 32 to 104°F |
| Humidity | 0 -98% Relative humidity, no-condensation |
| Storage temperature | 14 to 122°F |
| Altitude | 0 – 2185 yards |
| Ingress Protection | IP 40 |
| Operating pollution degree | 2, according to IEC 60529 |
| Power Source | |
|---|---|
| Maximum Current Rating | 20A @ 120V / 16A @ 230V |
| Duty cycle (@70°F ambient) | 16A to 20A, 3 min. on/ 10 min. off[br]10A to 15A, 3 min. on/ 5 min. off[br]0A to 10A, continuous |
| General Specification | |
|---|---|
| Weight | 2.5lbs (unit)[br]5lbs (complete with accessories) |
| Size (L x W x D) | 9 x 6 x 4” |
| Applied Parts Connection Box | |
|---|---|
| Size (L x W x D) | 6.1 x 2.6 x 1.1” (not including flying lead) |
| Weight | 0.33lbs |
| Rating | Category I |
| Environmental Protection | IP 40 |
| Impact rating | 5J |
| Meets the safety standard | BS EN 61010-1:2010 Pollution degree 2 |
| Voltage rating (maximum) | 230Vac |
Register your product today to activate your warranty and to stay up to date with the latest product updates, news and support information.
If you wish to calibrate your SafeTest 99, please locate the nearest service center or contact us directly using the link below.
Sign up to our mailing list today to stay up to date with the latest industry news and information from Seaward.
Contact us
Email: sales@rigelmedical.com
Switchboard: +44 (0) 191 586 3511
Phone: +44 (0) 191 587 8730
