The Rigel 277 Plus is a portable medical electrical safety analyser combining IEC/EN 60601-1 compliance with additional test facilities for IEC/EN 61010 (Laboratory Equipment) including Touch Leakage, Voltage Measurement and dedicated IEC 61010 Measuring Device (Body Model).
Customised test routines can be created to meet local standards and variants of safety test standards. The Rigel 277 Plus safety analyser performs manual, automatic and semi automatic test routines allowing full control of power up and power down sequence, thus reducing the overall test times.
The Rigel 277 Plus boasts a large full graphics display, internal memory, QWERTY keyboard and printer making this a completely stand alone medical safety analyser.
Rigel 277 Plus
| AC Earth Bond Test | |
|---|---|
| Test Current | 100mA, 1A, 10A, 25A |
| Current Source | Regulated |
| Open Test Voltage | 6V rms nominal |
| Range | 0.01ohms - 19.99ohms / 0.01ohms counts |
| Accuracy | ± 5% of reading, ± 2 counts |
| Measurement | 4-wire, floating earth |
| Insulation Test | |
|---|---|
| Test Voltage | 350 / 500V d.c. nominal |
| Auto Ranging | 100kohms - 20 Mohms (L) / 0.01Mohms counts 20Mohms – 100Mohms (H) / 0.01Mohms counts |
| Accuracy | ± 5% of reading, ± 2 counts (L) ±10% of reading, ± 2 counts (H) |
| Open Circuit Voltage | <750VDC |
| IEC 60601 Leakage Test | |
|---|---|
| Supply Voltage | Incoming mains (230/110VAC) |
| F-Type Open Circuit Voltage | 110% +/-20% of Mains Input Voltage |
| Maximum Load | 16A (13A for UK model) |
| Input Impedance | 1Kohm – as per 60601 MD |
| Frequency Response | as per IEC 60601-1 requirements |
| Range | 0.000mA – 9.999mA / 0.001 counts |
| Accuracy | ± 3% of reading, ± 4 counts |
| IEC 61010 Leakage Test | |
|---|---|
| Supply Voltage | Incoming mains (230/110VAC) |
| Maximum Load | 16A (13A for UK model) |
| Input Impedance | 2Kohms – as per 61010 MD |
| Frequency Response | DC – 2.5kHz (as per IEC 61010) |
| Range | 0.10mA – 3.50 mA / 0.01 counts |
| Accuracy | ± 3% of reading, ± 4 counts |
| Load Test | |
|---|---|
| Measured Load | 0.06 - 4kVA |
| Measured Voltage | Mains Supply +/-10% |
| IEC Lead Test | |
|---|---|
| Test | 40V a.c., 1mA nominal |
| Detects | Good, Open, Short, Reverse |
| General Specification | |
|---|---|
| Size | 400mm x 320mm x 160 mm |
| Weight | Appropriately 9 kg |
| Operating | 0ºC to 40ºC (non condensing) |
| Storage | -10ºC to 50ºC (non condensing) |
| Maximum R.H | 90% |
| Part Numbers | |
|---|---|
| 350A910 | UK / Ireland |
| 350A913 | Euro - Schuko |
| 350A917 | French |
| 350A915 | Danish |
| 350A918 | Czech / Polish |
| 350A914 | US (110V – 60Hz) |
| 350A912 | Australian |
The barcode scanner from Rigel Medical is a must have accessory for those who require fast and accurate data entry into the Rigel 277 electrical safety analyser. View Product
Rigel’s Med-eCare Plan is at your service for the entire Rigel Medical range. It covers all typical and unexpected costs associated with calibration and maintenance of your test equipment for the duration of the plan. View Product
The Rigel 601 checkbox accurately replicates the leakage characteristics of equipment designed to IEC 60601-1, providing calibrated leakage values for the verification on electrical safety analysers. View Product
Ask a question about this product
Rigel 277 Datasheet
Rigel 277 Firmware
