Rigel 601 Calibration Checkbox

The Rigel 601 checkbox accurately replicates the leakage characteristics of equipment designed to IEC 60601-1, providing calibrated leakage values for the verification on electrical safety analysers. With the ability to generate both AC and DC leakage currents as well offering dedicated F-type circuitry, the Rigel 601 provides calibrated values for Earth Leakage, Enclosure Leakage, Patient Leakage and Patient Leakage Mains on Applied Parts.

In addition, the Rigel 601 is able to provide a series of highly accurate resistance values to check the linearity of the Earth Bond and Insulation measuring circuits.

Dedicated switch positions provide individual PASS and FAIL values for B/BF and CF limits as per IEC 60601-1.

Technical Specification:

Earth Bond
Test Points	0.05 Ohm 0.10 Ohm 0.20 Ohm
Accuracy	+/- 2%, nominal value, factory calibrated
Maxumum Test Current	25 A
Maximum Test Duration	30 seconds @ 25A

Insulation
Test Points	2M Ohm 20M Ohm
Accuracy	1%, nominal value, factory calibrated

Leakage
Earth Leakage	Yes
Enclosure Leakage	Yes
Patient Leakage	Yes
PASS Value	85% of IEC 60601 test limit
FAIL Value	115% of IEC 60601 test limit See Table T1 for values
Accuracy	0.5%, factory calibrated

F-type Leakage
PASS Value	25μA
FAIL Value	2.5mA
Accuracy	Nominal value

General Specification
Weight	3.2KG
Size	250 x 140 x 200mm
Calibration Interval	36 months
Warranty	12 months

Operating Conditions
Temperature	15-30°C
Humidity	0-98% RH Non condensating