A.
Before you start;
A bitmap logo can be transferred to the Rigel 288 for use with the Seaward Test ‘n' Tag print system.
The logo requiring upload must meet the following criteria:
The Rigel 288 can hold only one logo at a time, if you added a new logo the first one would be automatically overwritten.
On the 288
Press button (F4), select Data Transfer using the up/down keys, select load T ‘n' T logo and press the button (F4).
The Rigel 288 will now attempt to connect to the PC, setup in Bluetooth Favourites. When a connection has been established the display will show the Bluetooth icon in the top right corner.
The Rigel 288 is now ready to receive data. The amount of data received is shown numerically on the top left of the display (0 in the screen shot above).
When using the BlueTooth Downloader application, select Send File from the File menu in the task bar. This will open a window allowing you to select the Bitmap file.
Select the required Bitmap and click on Open. The Bluetooth Downloader will now transfer the file to the Rigel 288.
When the transfer is complete, press the OK button (F4) to save the logo. The logo is now available for printing using the Seaward Test 'nTag printer.
Note: The file transfer can be made using any suitable PC application such as the Seaward Bluetooth Downloader (data transfer.exe) or Hyperterminal.
This text is also available as a .pdf application note in the Support / Download section of this website.
End.
